Specifications; Ordering Information - Honeywell VS8510 Manual

VS8510/VS8520 MILLIVOLT COMBINATION GAS CONTROL

SPECIFICATIONS

IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances. Therefore,
this unit may not exactly match the listed
specifications. Also, this product is tested and
calibrated under closely controlled conditions, and
some minor differences in performance can be
expected if those conditions are changed.
Models
VS8510 circuit consists of a gas valve, thermopile, millivolt
thermostat, and a pilot burner. VS8510 has operator and
power unit powered by 750mV Thermopile generator
VS8520 circuit consists of a gas valve, quick dropout
thermocouple, thermopile, millivolt thermostat and a pilot
burner. VS8520 has operator powered by 750mV Thermopile
and the power unit powered by 30mV Quick Dropout
Thermocouple. When the appliance standard requires a gas
valve with a fast dropout thermocouple, use the VS8520.
Model Suffix Letter
A
D
E
M
Q
R
K
L
N

ORDERING INFORMATION

When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
1. Model
2. Tip style
3. Type of gas
4. Accessories
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Relations
Honeywell, 1885 Douglas Drive North
Minneapolis, Minnesota 55422-4386
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
68-0203
Options:
High/Low Adjustable Pressure Regulator—This option is
available on both models and provides a main burner
regulator with preset maximum and minimum pressure
settings for natural and LP gases. This regulator has infinite
adjustment between minimum and maximum pressure
settings.
Convertible Pressure Regulator–Available on standard
models only. Converts factory natural gas setting to LP gas
setting by removing the regulator adjustment screw and
adding a LP spring then adjusting the screw to obtain the
desired outlet pressure.
Outlet Screen—Wire mesh outlet screen prevents debris
such as thread dope from getting into valve from outlet
opening.
Inlet and Outlet Mounting Threads—Optional mounting
threads are available on the inlet and outlet sided with
M5X0.8 or #10-24 threads.
Additional—Table 1 lists more model configuration
identifications.
Table 1. VS8510/VS8520 Configurations
Pressure Regulator Type
Standard
High/Low
Convertible High/Low
Standard
High/Low
Convertible High/Low
Standard
High/Low
Convertible High/Low
2
Ambient Temperature Range
0˚F to 175˚F (-18˚C to 79˚C)
0˚F to 175˚F (-18˚C to 79˚C)
0˚F to 175˚F (-18˚C to 79˚C)
-40˚F to 175˚F (-40˚C to 79˚C)
-40˚F to 175˚F (-40˚C to 79˚C)
-40˚F to 175˚F (-40˚C to 79˚C)
0˚F to 225˚F (-18˚C to 107˚C)
0˚F to 225˚F (-18˚C to 107˚C)
0˚F to 225˚F (-18˚C to 107˚C)