Table of Contents
Advertisement
Device Settings
Tap the speaker image on the main screen to enter Device Settings.
• Led Panel: Turn on and off the Acer Halo LED display.
If Led Panel is turned off, the Effect function is disabled
as well.
• Halo Light: Turn on and off the light of the Acer Halo
RGB lit base. If Halo Light is turned off, Night Light (as
below) is disabled as well.
• Night Light: Turn on and off the night light.
• E ffect(StandBy)/Effect(Assistant): Select and apply
effects to the selected Stand By and Assistant images.
• Unpair: Unpair the mobile device and the speaker.
• Speaker Firmware version: Show the current firmware
version installed on the speaker.
• Software version: Show the current software version.
NOTE
» The Acer Halo app only allows for one mobile device to be paired with one Acer Halo Smart
Speaker at a time. You must unpair the existing mobile device first, and then pair to a new
one again if necessary. For more information, please read the FAQ.
» To work with the Acer Halo app, the speaker firmware version has to be updated to 1.44.1.0.5
or later. Normally the speaker will check and update the online firmware automatically to
keep your device firmware up-to-date. You can also execute "power cycle" to trigger the
firmware update immediately.
19
Advertisement
Table of Contents
