If You Are Having Difficulty With The Fax Machine - Brother FAX-T98 User Manual

If you are having difficulty with the fax machine

If you think there is a problem with the way your faxes look, make a
copy first. If the copy looks good, the problem is probably not the fax
machine. Check the chart below and follow the troubleshooting tips.
DIFFICULTY
Printing or Receiving Faxes
Condensed print and white
streaks across the page or the
top and bottom of sentences
are cut off.
Vertical black lines when
receiving.
Phone Line or Connections
The fax machine does not
answer when called.
External telephone answering
device (TAD) does not answer
when called
No dial tone on the handset
Sending Faxes
Poor sending quality.
Dialling does not work
Vertical black lines when
sending.
SUGGESTIONS
If your copy looks good, you probably had a bad connection, with static
or interference on the phone line. If the copy looks bad, clean the
scanner area. If there is still a problem, call Brother or your dealer for
service.
The sender's scanner may be dirty. Ask the sender to make a copy to
see if the problem is on with the sending machine. Try receiving from
another fax machine.
If the problem continues, call Brother or your dealer for service.
Make sure the fax machine is in the correct receiving mode for your
setup. (either FAX ONLY or F/T) Check for a dial tone. If possible, call
the fax machine to hear it answer. If there is still no answer, check the
telephone line cord connection. Connect a standard telephone handset
to the fax machine's telephone socket. If there is no ringing when you
call the fax machine, ask your telephone company to check the line.
Connect the telephone line cord from your TAD to the correct socket.
Make sure the TAD is set to answer calls. (See Connecting an external
telephone answering device (TAD) on page 1-10.)
Press Speaker Phone—OR—Lift the handset. If you don't hear a dial
tone, check telephone line cord connections at the fax machine and wall
socket. Check that the handset is connected to the fax machine's
handset socket. Test the wall socket with another single line telephone.
If there is no dial tone at the wall outlet, call your telephone company.
Try changing your resolution to FINE or S.FINE. Make a copy to check
the fax machine's scanner operation.
Check all line cord connections.
Check power cord connection.
Send a manual fax by pressing Speaker Phone or by lifting the handset
and dialling the number. Wait to hear fax receiving tones before
pressing Start/Copy.
Use the fax machine to make a copy. If the copy shows the same
problem, the scanner area is dirty. Lift the top cover and check the
document path. Clean the scanner's white roller and the glass strip
under the roller using isopropyl alcohol and a lint-free cloth. (See
Cleaning the scanner on page 12-10.)
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 6