Siemens SIMATIC TP700 Comfort INOX PCT Operating Instructions Manual page 25

2. Carefully place the device on the front of the device (interfaces point to you).
3. Insert the mounting seal into the stainless steel front as shown. Also note points ④ - ⑥.
4. Check the correct fit of the mounting seal:
– The coding tap is placed at the specified location.
– All positioning hooks rest flush in their cutouts. The mounting seal is installed correctly
– The edge of the mounting seal is flush with the edge of the stainless steel front all
Comfort Panels INOX PCT
Compact Operating Instructions, 07/2021, A5E38804191-AE
④ Seal corner is underneath the housing frame.
⑤ The positioning hook of the seal fully engages into the cut-out, flat without protrusion.
⑥ The coding key lies flat in the intended cut-out.
when it lies flat on the entire stainless steel front. This must not lead to distortions and
protrusions.
If necessary, correct the seat: To do this, press the mounting seal into the recess.
around.
Installing and connecting the device
3.2 Inserting the mounting seal
25