Real Time Transmission - Brother Model MFC-5200C User Manual

Real Time Transmission

When you are sending a fax, the MFC will scan the originals into the
memory before sending. Then, as soon as the phone line is free, the
MFC will start dialing and sending.
If the memory becomes full, the MFC will send the original in real
time (even if REAL TIME TX is set to OFF ).
Sometimes, you may want to send an important original immediately,
without waiting for memory transmission.
You can set REAL TIME TX to ON .
1
Place the original face up in the ADF, or face down on the
scanner glass.
2
Press Menu/Set, 2, 2, 5.
3
To change the default setting, press
or
Press Menu/Set.
Go to Step 5
OR
— —
For the next fax transmission only, press
NEXT FAX ONLY .
Press Menu/Set.
4
Press
Press Menu/Set
5
Press 1 if you want to choose more settings and the LCD will
return to the SETUP SEND menu
OR
— —
Press 2 if you have finished choosing settings, and then go to
Step 6.
6
Enter the fax number.
Press Fax Start.
If you are sending a color Fax, the MFC will send it in real time
even if REAL TIME TX is set to OFF .
6 - 9 SETUP SEND
to select ON (or OFF ).
or to select ON (or OFF ).
SETUP SEND
5.REAL TIME TX
or to select