Advertisement
WEEE Disassembly Instructions
Printed circuit boards (PCBs)
Disassembling the product
Required tools
Safety precautions
Disassembly sequence
EU2SPE WEEE Disassembly Instructions
6
The following PCBs may be located within the product. Some variation may exist
depending on configuration.
DIMMs (number varies by configuration)
l
I/O pcb
l
SSD pcb
l
PDB pcb
l
DIB pcb
l
SP pcb
l
This section describes how to disassemble the product for disposal and recycling.
The following tools are required to disassemble the product.
Tool
Description
Phillips
#1
screwdriver
Phillips
#2
screwdriver
Flat-head
Small
screwdriver
Needle-nose
Use to remove precise hardware from PCBs.
pliers
Wire Cutters
Use to remove capacitors, or cut wires
Comply with the following precautions:
Wear protective glasses during disassembly;
l
Follow the recommended disassembly method and sequence;
l
Always use the tool specified in the removal procedures;
l
Follow standard industry best practices, including all applicable health and safety
l
regulations.
Disassemble the product according to the following disassembly sequence.
1. Remove Power supplies (2)
Advertisement
