Displays On The Machine - Fujitsu Siemens Computers AMILO Desktop L Series First-Time Setup

Displays on the machine

Operationaldisplay Machine
The displays appear on the front of the casing.
1 = Memory card reader status display
Memory card reader status display
• The display lights up continuously: A memory card has been inserted.
• The display flashes: The memory card is being accessed.
• The display remains unlit: There is no memory card in the reader.
Operational display
Operationaldisplay
Do not disconnect the machine from the mains whilst in power-saving
mode, otherwise data may be lost.
• The display lights up white: The machine is switched on.
• The display flashes white: The machine is in power-saving mode. After switching
on at the on/off switch the machine switches on or reverts to the status it was
in before power-saving mode was initiated.
• The display flashes yellow: The hard disk is being accessed.
• The display remains unlit: The machine is not connected to the mains or is not ready for
operation. If the machine is ready for operation, it can be switched on at the on/off switch.
10600985329, edition 1
1
2
2 = Operational display
Operation
English - 13