Page 1
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide...
Page 2
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Page 3
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Manual Acquisition Go to www.hikvision.com for the latest user manual. Symbol Conventions The symbols that may be found in this document are defined as follows: Symbol Description Indicates a hazardous situation which, if not avoided, will or could result in death or...
Page 4
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide • Store the device in dry, well-ventilated, corrosive-gas-free, no direct sunlight, and no heating source environment. • Avoid fire, water, and explosive environment when using the device. • Avoid lightning strike for device installation. Install a lightning arrester if necessary.
Page 5
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Battery • DO NOT charge the battery continuously for more than one week. Overcharging may shorten the battery life. • Battery will discharge gradually if it is not used for a long time. It must be recharged before using.
1 Introduction and Overview Introduction The DS-MDS003 Dock Station, integrated with Digital Evidence Management System (hereinafter referred to as software), provides you with an easy way to access body cameras, and collect, store, and play audio and video files in the connected body cameras via the software. You can associate user accounts with body cameras, search data collection records, and upload data via the software.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide The device overview below takes example of one model. The actual device overview depends on the actual models. Figure 1, Device Overview 1.3.2 Host Description Figure 2, Host Overview Table 1-1 Host Description No.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide 1.3.3 Dock Station Description Figure 3, Dock Station Overview Table 1-2 Dock Station Description No. Name Description There is a mini USB interface in each bin to connect a body camera. The bin door can be locked after you connect a Body Camera Bin body camera in it, and it will automatically open if you pass the ID verification.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 4, Host Interfaces Table 1-3 Host Interfaces Description Name Description Power Supply 100 to 240 VAC power supply USB 2.0 Interface To connect to a mouse or keyboard for software operation, or connect to a USB flash disk to upgrade the device USB 3.0 Interface...
Page 11
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide screen print from the left and the second “Dock A” screen print from the left. If Device Supports Two Dock Stations: Use hanging bracket (1-2), and fasten six M6 stepped screws on the six hole sites on the vertical directions of the first “Host” screen print from the left, the first “Dock A”...
Page 12
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 6, Install Hanging Bracket-Wall Mount 2. Install the host. 1) Align the host side edge to the stripe screen print edge on the hanging bracket, and align the two installation holes on the host rear panel to the two M6 stepped screws fastened on the vertical direction of “Host”...
Page 13
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 8, Install Dock Station 3) Fasten two M6 hand screws from the top and bottom respectively. Figure 9, Fasten Screws Figure 10, Install Other Dock Station(s) 4. Optional: Repeat the steps above to install dock station B/C/D.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 11, Install Decorating Component Result Wall mount is completed. Figure 12, Wall Mount Effect Mobile Mount You can install dock station on mobile bracket. 2.2.1 Install Mobile Bracket Install the mobile bracket before you install the dock station.
Page 15
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide 2) Fasten the bolts on the wheels to the corresponding positions on the base through four M10 nuts. 3) Turn the base over again. Figure 13, Install Universal Wheels 2. Install the connecting pipes.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide 3. Install the horizontal shelf. 1) Adjust the shelf height according to the actual application scene, and align the holes on the shelf to those on the connecting pipes. 2) Fasten four M8 × 70 mm bolts into the holes through four spring washers and four flat washers from the front with an L-type hex wrench.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 16, Install Hanging Bracket-Mobile Mount 2. Install the host, dock station(s), and side decorating component. Refer to step 2 to step 5 of “Wall Mount” for details. Result Mobile mount is completed.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Before You Start Prepare the desktop bracket components and accessories. Steps 1. Insert the connecting pipes downward into the holes on the bracket base. 2. Fasten two M8 × 20 mm bolts into the holes on the triangle supports on the bottom of the connecting pipes through two spring washers and two flat washers with an L-type hex wrench.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 19, Install Hanging Bracket-Desktop Mount 2. Install the host, dock station(s), and side decorating component. Refer to step 2 to step 5 of “Wall Mount” for details. Result Desktop mount is completed.
Page 20
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 21, Uninstall Decorating Component 2. Uninstall dock station(s). 1) Unfasten the two M6 hand screws from the top and bottom of the last dock station. 2) Pull the dock station rightward until the stepped screws on the rear panel installation holes slide to the released status.
DS-MDS003 Dock Station (For DS-MCW405/32G/GPS/WIFI Body Cameras) Quick Start Guide Figure 23, Uninstall Host 3 Activation After the dock station starts, the screen will show the software page automatically. For the first access, activate the device by setting an admin password. No operation is allowed before activation.