Advertisement
Importing a MIDI setting file
1.
Download a MIDI setting file for "TRAKTOR PRO 2" and
save it to the location below where "TRAKTOR PRO 2"
is installed. (When you use "TRAKTOR PRO 2" application
for first time, start up and close "TRAKTOR PRO2"
application once, then go to step 1.
■ Windows PC
Library / Document / Native Instruments /
Traktor x.x.x / Settings
■ MAC OS-X
Home (User) / Document / Native Instruments/
Traktor x.x.x / Settings
In case of Windows OS, "ASIO Driver software" exclusive
for XW-DJ1. Please install it with reference to the separate
Tutorial Manual (Page 11 - 12).
(This operation is not necessary for MAC OS-X.)
2.
Use a USB cable (Corresponding to High Speed) to
connect to your computor and press the
button to turn on power.
3.
Start up "TRAKTOR PRO 2" .
4.
Select "Preferences" on the top right of screen.
(When Windows PC, "Preferences" starts automatically.)
5.
Select "Import" on the bottom left of screen.
6.
Select MIDI setting file saved in step 1.
Then Click "OK" .
■ Click "Audio Device Settings" checkbox,
then click "OK" .
7.
AUDIO setting with XW-DJ1.
■ After step 6 process, select "Audio Setup" and "Output
Routing" in "Preferences" list on the left. Then set them
in reference to below. (Only at the first time)
[Audio Setup]
[Output Routing]
■ When MAC OS-X
(power)
[Audio Setup]
memo
(When Windows PC, "Audio Device" shows "Casio ASIO Driver(ASIO)" .)
[Output Routing]
8.
MIDI setting with XW-DJ1.
■ Select "Controller Manager" and check "Device
Setup" contents.
- Device : 「Casio XW-DJ1 - 」
■ Select "In-Port" and "Out-Port" . Then set them
to "XW-DJ1" (In case of MAC OS-X) respectively.
TRAKTOR PRO 2
「Audio Device」
「Mixing Mode」
「Output Monitor - L 」
「Output Monitor - R 」
「Output Master - L 」
「Output Master - R 」
→ Casio XW-DJ1
Audio out
→ Internal
→ Analogue 3
→ Analogue 4
→ Analogue 1
→ Analogue 2
Windows PC
「Casio MIDI In」
「Casio MIDI Out」
EN-2
Advertisement
