Setting Fax Storage
If you select Fax Storage, your machine stores the received fax in the
memory. You will be able to retrieve fax messages from another
location using the Remote Retrieval commands.
1
Menu/Set
Press
2
Press
or
▲
Fax Storage .
Menu/Set
Press
3
Stop/Exit
Press
If you have set Fax Storage, a backup copy of the received fax
will automatically be printed at the machine.
Setting PC Fax Receive (MFC-3340CN only)
If you select PC Fax Receive, your machine will temporarily store your
received faxes in its memory, and then automatically send the faxes
to the PC. You can then use your PC to view and store these faxes.
1
Menu/Set
Press
2
Press
or
▲
PC Fax Receive .
Menu/Set
Press
3
Press
or
▲
Menu/Set
Press
4
Stop/Exit
Press
■
Before you can set up PC Fax Receive you must install the
MFL-Pro Suite software on your PC. Make sure your PC is
connected and turned on. (For details see Using Brother
PC-FAX software on page 5-1 in Software User's Guide on
the CD-ROM.)
■
If you select Backup Print:On , the machine will also print
the fax at your machine so you will have a copy if there is a
power failure before it is sent to the PC.
■
If you get an error message and the machine cannot print the
faxes in memory, you can use this setting to transfer your
faxes to your PC. (For details, see Error messages on page
12-1.)
6 - 2 REMOTE FAX OPTIONS
2
5
1
,
,
,
.
to select
▼
.
.
2
5
1
,
,
,
.
to select
▼
.
to select On or Off .
▼
.
.
1.Forward/Store
1.Fwd/Page/Store
Backup Print:On