Advertisement
Installation Instructions
Each MT10 comes with a Quick Install Guide within the box. This pamphlet contains detailed step-by-step guides and images to assist you in the
physical installation of the sensors.
Choosing your Mounting Location
As MT sensors rely on a gateway for connectivity to the dashboard, make sure that a working compatible gateway is in range of the sensor when choosing a
mounting location.
Some examples of ideal mounting locations:
1. On a wall for ambient temperature and humidity readings.
2. Inside a rack to monitor the rack temperature.
For most mounting scenarios, the MT10 has flexible options to provide quick and simple mounting. The instructions are as follows:
1. Start by removing the battery compartment cap and inserting two AA batteries into the compartment.
2. In order to mount the sensor on different locations, there are three options
a. Screws - The mounting plate can be directly screwed onto the wall.
b. VHB tape - Double-sided VHB tape can be used to stick the mounting plate on any type of surface.
c. Magnet - Stick the magnet on any surface and the mounting plate can be stuck to the magnet.
Once the mounting plate is on the desired surface, slide the MT10 sensor onto the plate and use the included Torx screw to secure the sensor.
3
Advertisement
