Yamaha DTX-PRO Firmware Update Manual

Hide thumbs Also See for DTX-PRO:

Download this manual

Thank you for choosing a Yamaha product.

This document explains how to update the firmware of the DTX-PRO and the revision history.

NOTICE

Please save your important data onto a USB flash drive before updating the firmware of the DTX-PRO.

•

This updater is to be used at the user's own risk.

•

DO NOT power off or disconnect the cable from the DTX-PRO during the updating process. Doing so

•

may damage the DTX-PRO.

DO NOT remove the USB flash drive from the DTX-PRO during the updating process. The DTX-PRO

•

and the USB flash drive may become inoperable.

If the update failed, and the DTX-PRO no longer operates, run the update program again. If doing so

•

does not solve the problem, please contact your Yamaha dealer.

This firmware and documentation are the exclusive copyrights of Yamaha Corporation.

•

Reproducing or modifying all or parts of this firmware or its documentation without permission is

•

strictly prohibited.

The company names and product names in this document are the trademarks or registered trademarks

•

of their respective companies.

DTX-PRO

Firmware Update Guide

DT X - P RO F i r m w a r e U p d a t e G u i d e

Page 1 DO NOT remove the USB flash drive from the DTX-PRO during the updating process. The DTX-PRO • and the USB flash drive may become inoperable. If the update failed, and the DTX-PRO no longer operates, run the update program again. If doing so • does not solve the problem, please contact your Yamaha dealer.
Page 2 Updating procedure NOTICE Please save your important data onto the USB flash drive before updating the firmware of the DTX-PRO. After downloading, decompress the archived file, and then fin d the "***.PRG" file. Copy the "***.PRG" file to the root of the USB f lash driv e.
Page 3 Hold down the [START/STOP] button and press the Standby/On switch to turn the power on. After a few seconds, the following message will appear. Installer [MENU]： Install [EXIT]： Delete Press the button Yamaha Corp. Press the [MENU] button. The following messag e will appear. Installer [MENU]： Execute [EXIT]： Cancel Program ver.*.** Yamaha Corp.
Page 4 Updated the disp lays on some screens. ・ Fixed m inor problems. ・ Manual Development Group ©2020 Yamaha Corporation Published 11/2020 YJ-A0 DT X - P RO F i r m w a r e U p d a t e G u i d e...