Using The Digital Zoom Function - Panasonic PT-AE100U Operating Instructions Manual

Using the DIGITAL ZOOM function

This function lets you enlarge a
single section of the picture.
Furthermore, the spot display mode
which is used to select the section
which is to be enlarged can also be
used when making presentations.
# Press a DIGITAL ZOOM +/-
button.
The projector will change to spot
display mode.
$ Use the F F , G G , I I and H H
buttons to move the spot to the
section which you would like to
enlarge, and then press the
ENTER button.
The area around the spot will
then be enlarged to twice the
normal size.
% Use the DIGITAL ZOOM +/-
buttons to change the
enlargement ratio.
The enlargement ratio can be
changed within the range of x1 to
x2, in steps of 0.1.
NOTE:
B When PC signals are being input,
the enlargement ratio can be
changed within the range of x1 to
x3.
28
All manuals and user guides at all-guides.com
& Press the MENU button to
return to the normal screen.
The projector will not return to
spot display mode at this time. To
return to spot display mode, clear
the enlarged picture display from
the screen and then press a
DIGITAL ZOOM +/- button again.
NOTE:
B This function can only be used
when using the remote control
unit.
B If the type of signal being input
changes while the digital zoom
function is being used, the digital
zoom function will be cancelled.
Correcting key
When either the projector or th
affect the image. You can corr
procedure.
# Use the KEYSTONE butto
You can also correct keysto
in the MAIN MENU and pre
Picture condition
$ Press the MENU button to
NOTE:
B Keystone distortion can be
projector. However, the gre
picture quality will deteriora
good level of focus. To obta
and screen in such a way th
is as minimal as possible.
B The picture size will also ch
carried out.