DIS-700G-28SW Industrial Layer 2+ Gigabit Managed Switch with SFP slots
Rack Mounting
When mounting the switch, practice good safety habits. Relay rack mounting normally requires at
least two people.
1. Obtain the tools required for the mounting hardware.
2. Attach the mounting brackets to the switch in one of two supported positions by using the
screws in the accessory kit.
3. From the front of the relay rack, position the switch in preferred location.
4. Secure the switch in place with the provided screws on both left and right side of mounting
bracket.
Position 1
Mounting Bracket Position 1 for Standard Mount
Quick Installation Guide
Position 2
4