Base Unit; Optical Pick-Up Block (Da11Mmvgp) - Sony HCD-FX300i US Service Manual

2-7.

BASE UNIT

Note 1: This illustration sees the top panel block from base unit side.
1 four floating screws
(PTPWH M2.6)
2-8.

OPTICAL PICK-UP BLOCK (DA11MMVGP)

Note 1: When disconnecting the wire (fl at type) (16 core) of optical pick-up block, solder the short-land.
7 optical pick-up block
4 BD73 board block
(US, CND, UK, SP, TW, KR, TH, AUS)
BD73U board block (AEP, E2, E51, MX)
1 Remove four solders.
4 two vibration proof rubbers (green)
7 base unit
2
5 tapping screw (P2)
(DA11MMVGP)
3 two vibration proof rubbers
(red)
5 four claws
Note 2: Four claws might be fixed by bond.
Please fix four claws by the bond when
you replace the cover (D1).
6 cover (D1)
2 Solder the short-land.
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (16 core).
6 shaft (support)
3 wire (flat type) (16 core) (optical pick-up)
• Abbreviation
AUS : Australian model
CND : Canadian model
E2 : 120V AC area in E model
E51 : Chilean and Peruvian models
KR : Korean model
MX : Mexican model
SP : Singapore model
TH : Thai model
TW : Taiwan model
HCD-FX300i
Ver. 1.2
9