Chapter 3 Operating the Tape Library
3.5 Remote Management Unit (RMU)
Figure 3.29 ETERNUS LT40 S2: Configuration, Date/Time page
3.5.6.8
Setting Error Log Mode
This page allows service personnel to set the error log mode to
Figure 3.30 ETERNUS LT40 S2: Configuration, Log page
The trace level and trace filter selection options are only changeable by Service personnel.
3.5.6.9
Setting Event Notification Parameters
This page allows the user to set the event notification to On.
To use this function, the Host Name and the Domain Name must be set. For details, refer to
the Network Configuration" (page
Choices for the event notification are:
•
Event Notification
Select this item to be notified of library errors via email
•
Notification Level
Specify at which type of error/warning you would like to be informed via email
•
To Email Address
Enter the email address of the individual you would like to receive the errors and/or warnings
FUJITSU Storage ETERNUS LT40 S2/LT60 S2 LTO Library Installing, Starting Up and Maintaining
57).
64
Copyright 2018 FUJITSU LIMITED
Off, Continuous,
or to
Stop Trace At First Error.
"3.5.6.4 Changing
P3AM-5392-07ENZ0