Remote Control - Honeywell CL152 User Manual

USE & OPERATION (CONTINUED)

REMOTE CONTROL

Model without Model with
Ionizer
NOTE:
• The remote control requires a CR2025 (1x3V) coin type or equivalent battery for replacement.
• Open the battery compartment at the back of the remote control and insert batteries inside.
Care must be taken to insert the batteries according to the correct polarity (+ / –) markings
shown inside the battery compartment.
• Always point the remote control signal transmitter towards the unit when operating. Make sure
that the signal path is not obstructed.
• Remove the batteries if the unit is not going to be used for an extended period of time.
• Do not drop the remote control.
• Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.
• Do not mix old and new batteries.
• Do not recharge the battery.
• Exhausted batteries are to be removed from the product and safely disposed of as per local
regulations.
• Do not dispose of batteries in fire. Batteries may explode or leak.
WARNING: Caution for ingestion of the small battery. Keep away from children and animals.
POWER:
SPEED:
SWING:
TIMER:
COOL:
WIND TYPE:
ION:
Ionizer*^
ON / OFF
Low / Medium / High
Controls the motion of the louvers
Controls the Timer function for automatic off
Controls cooling or fan option
Switch between Random & Sleep
Switch ON/OFF the Ionizer
* Applicable for models with this feature only.
^ Ionizer reduces particles in the air. This is not an air purifier.
EN 4