Download Print this page
Ysoft SafeQ USB Card Reader v3 Administrative Manual

Ysoft SafeQ USB Card Reader v3 Administrative Manual

Advertisement

Quick Links

USB Card Reader v3 Administrative Guide
FCC ID:XUY0YX0MU03076
IC:8647B-0YX0MU03076
USB Card Reader v3 Administrative Guide
1. Introduction
Purpose of the document
This documentation provides essential information on installation and configuration of YSoft
SafeQ® USB Card Reader version 3.
Validity of the document
This document applies to YSoft SafeQ® USB Card Reader v3.
Goals and Objectives
The YSoft SafeQ® USB Card Reader v3 that could be simply connected to the multi-
functional device and serves for user authentication using card. Card must be assigned to
any user in the YSoft SafeQ system. After the successful authentication the user is able to
manipulate with device and perform his print jobs, copy jobs or scan jobs (depends on the
device).
The YSoft SafeQ® USB Card Reader v3 could be also connected to workstations and can be
used with the credit charger application or with the YSoft SafeQ client for authentication.
Terms and Abbreviations
MFD - Multi-Functional Device
USB Card Reader v3 - YSoft SafeQ® USB Card Reader version 3
Prerequisite knowledge
The person who installs USB Card Reader v3 must meet the following requirements:
knowledge of the YSoft SafeQ system (installation/administration/attendance)
knowledge of OS Win 2000, Win 2003 (installation/administration).
Disclaimer
The user that makes changes or modifications not expressly approved by the party
responsible for compliance (Y Soft Corporation a.s.) could void the user's authority to
operate the equipment.
Product Sheet
1

Advertisement

loading

Summary of Contents for Ysoft SafeQ USB Card Reader v3

  • Page 1 Card must be assigned to any user in the YSoft SafeQ system. After the successful authentication the user is able to manipulate with device and perform his print jobs, copy jobs or scan jobs (depends on the device).
  • Page 2 Card Reader v3 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.ysoft.com/EU-Declaration-of-Conformity The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction Federal Communication Commission (FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
  • Page 3 USB Card Reader v3 Administrative Guide Product Sheet on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐...
  • Page 4 USB Card Reader v3 Administrative Guide Product Sheet 2. Overview System overview YSoft SafeQ® USB Card Reader has following characteristics: • Connection and power supply of the card reader via the USB host interface. • Exchange of card reader possible without MFD turning off (hot-plug).
  • Page 5: Mounting Instructions

    USB Card Reader v3 Administrative Guide Product Sheet 3. Usage Please use the card by placing it on the edge of the reader as indicated below. 4. Mounting instructions Please mount Card Reader to MFD using mounting kit.
  • Page 6 USB Card Reader v3 Administrative Guide Product Sheet Keep unprotected cords out of the path of foot traffic to prevent tripping. Do not leave cords dangling anywhere where they can be pulled down and tripped over. 5. Configuration For configuration see USB Reader tool for Reader configuration. Risk Control Risk Analysis...
  • Page 7 EN 62368-1:2014/AC:2015 Y Soft Corporation, a.s. Technology Park, Technická 2948/13 616 00 Brno Czech Republic P: +420 533 031 500; email: info@ysoft.com Y Soft North America, Inc., 1452 Hughes Road, Suite 110, Grapevine, TX 76051, USA; P:+1 888-761-9977; email: info.na@ysoft.com...