Honeywell WK103501 Series Use And Care Manual

TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE
Light will not come on. A. Light switch is turned off. A. Check if the Power switch on the
LED Work Light is set to ON.
B. Fuse is blown or circuit breaker B. Check if the GFCI has tripped.
is turned off. Check if the 120 Vac circuit
breaker has tripped. Reset the GFCI
or circuit breaker.
C. Cord not plugged in. C. Plug in cord to 120 Vac source.
D. Cord frayed/worn/faulty. D. DO NOT USE WORK LIGHT.
5 YEAR LIMITED WARRANTY
You should read all of the instructions before attempting to use this product.
International Development Corporation (IDC) warrants this product against defects in material or
workmanship for a period of five (5) years from the date of original purchase. IDC agrees to either repair
the product or replace it, at the sole discretion of IDC. Only the original purchaser of this product is
extended this warranty. No warranty work will be provided under this warranty without purchaser's receipt
or other proof of the date of original purchase acceptable to IDC. Proof of the date of purchase must be
provided to IDC if the product is returned. Purchasing this product from a third party vendor negates all
warranties (expressed or implied) in this warranty.
The warranty does not apply to the following terms/conditions: 1.) acts of God, 2.) products that have been
subjected to unauthorized repair, opened, disassembled, and/or otherwise modified, 3.) products used not
in accordance with directions, 4.) damages exceeding the total cost of product, 5.) plastic or plastic
shades, 6.) the finish of any portion of the product (i.e. surface scratches, weathering, corrosion,
discoloration of brass components, as this is considered normal wear and tear). 7.) damages caused by
shipping, improper handling, accident, misuse or abuse. IDC is not responsible for damage of merchan-
dise in transit. Repaired or replaced products shall be subject to the terms of this warranty and are
inspected prior to return shipment. Damages that are incurred during transit should be reported at once to
the carrier and a claim should be filed with them.
IDC SHALL NOT BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM THE USE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL
IMPLIED WARRANTIES, IF ANY, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THIS
EXPRESS WARRANTY. Some states do not allow the exclusion or limitation of incidental or consequential
damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may
not apply to you. No other warranty, written or verbal, will be honored for this product. This warranty
grants you specific legal rights, you may also have other rights which vary from state to state. There are no
other warranties except those stated above.
Thank You
We appreciate your purchase of this IDC product. IDC has made every effort to supply a quality product
that insures long, trouble-free service. In the event that you have any type of problems with this product
and require a return address or for any other assistance please call our Toll Free Number 1-877-723-0723
• 8:00 A.M. - 5:00 P.M. Central Time, Monday - Friday • Email us at: customerservice@idctexas.com
You will need the following information: Model/Item Number of Product, Receipt, and Date of Purchase
All drawings and text are © copyright of IDC • Printed in China
SOLUTION
The Honeywell Trademark is used under license from Honeywell International Inc.
Honeywell International Inc. makes no representations or warranties with respect to this product.
This product is manufactured for International Development, LLC.
International Development, LLC.
899 Henrietta Creek Rd. Roanoke, TX 76262 USA
Toll-free: 1-877-723-0723
© 2016 IDC, all rights reserved.
LED PORTABLE WORK LIGHT
WITH USB CHARGING PORT
MODEL: WK103501XXXXX
USE AND CARE GUIDE