Appendix G: Port Address Mapping; Port Address Mapping - Hitachi VSP N800 Hardware Reference Manual

Appendix G: Port address mapping

Port address mapping

Each Fibre Channel port has a default port address (AL_PA) of EF. You do not have to
change this value because the storage system port can connect to the host bus adapter
(HBA) with the current setting.
If you want to change the AL_PA value, however, select a value from the following table.
If you use a value that is not in the following table or is already used by the HBA, the host
might not be able to recognize the VOL. If this problem or other problems occur, revert to the
default value of EF.
The following addresses are available for setting Fibre Channel ports.
Loop ID
AL-PA (0~29) AL-PA
EF 0 B4
E8 1 B3
E4 2 B2
E2 3 B1
E1 4 AE
E0 5 AD
DC 6 AC
DA 7 AB
D9 8 AA
D6 9 A9
D5 10 A7
D4 11 A6
D3 12 A5
D2 13 A3
Loop ID Loop ID
(30~59 AL-PA (60~89)
30 76 60
31 75 61
32 74 62
33 73 63
34 72 64
35 71 65
36 6E 66
37 6D 67
38 6C 68
39 6B 69
40 6A 70
41 69 71
42 67 72
43 66 73
Appendix G: Port address mapping
VSP N800 Hardware Reference Guide
Loop ID
AL-PA (90~119) AL-PA
49 90 10
47 91 0F
46 92 08
45 93 04
43 94 02
3C 95 01
3A 96 -
39 97 -
36 98 -
35 99 -
34 100 -
33 101 -
32 102 -
31 103 -
Loop ID
(120~125)
120
121
122
123
124
125
-
-
-
-
-
-
-
-
98