Related Manuals for Omega Altise OACHB24W
Summary of Contents for Omega Altise OACHB24W
- Page 1 OPERATION, MAINTENANCE AND SAFETY INSTRUCTIONS FOR OMEGA ALTISE CERAMIC HEATER MODEL: OACHB24W...
-
Page 2: Table Of Contents
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........................1-2 APPLIANCE DETAILS ..............................3 OPERATION ................................4 REMOTE CONTROL ............................. 5-6 MAINTENANCE AND CLEANING ..........................7... -
Page 3: Important Safety Instructions
Remove the package and ensure that the appliance is undamaged (keep packing box for later storage). In case of doubt do not use the appliance and contact Omega Altise Service. Do not let children play with any parts of the packaging. - Page 4 IMPORTANT SAFETY INSTRUCTIONS To avoid danger of electric shock, unplug from outlet when not in use and before cleaning. If the supply cord is damaged, it must be replaced by the manufacturer, its Service Agent or similarly qualified WARNING: persons in order to avoid a hazard. In order to avoid overheating, do not cover the heater. The heater must NOT be located immediately below a socket outlet.
-
Page 5: Appliance Details
7. Tip-over safety protection, double over-heating protection (Thermistor, temperature fuse). 8. Convenient operation with infrared remote control function. 9. ECO energy saving function. Technical Details Model Number OACHB24W Voltage Rating 220 – 240 Vac ~50 Hz Power Rating 2400W Noise level ≤50dB... -
Page 6: Operation
OPERATION Turning on the Heater Connect the heater to the power supply by plugging the power cord into an outlet (220 – 240V 50Hz). Put the heater into standby mode by switching on the switch located at the back. Turn on the device by pushing the power button on the control panel. -
Page 7: Remote Control
REMOTE CONTROL Overview... - Page 8 REMOTE CONTROL Replacing the Battery To replace the battery, remove the battery tray from the bottom of the remote. Remove the old battery and dispose of properly. Replace it with a 3v CR2032 coin cell battery. Insert the tray into the remote, ensuring to maintain the same orientation as when it was removed.
-
Page 9: Maintenance And Cleaning
MAINTENANCE AND CLEANING Before cleaning or performing maintenance disconnect the heater from the power supply and ensure that it has cooled. Wipe the surface of the heater with a soft, damp cloth. Do not use flammable cleaning agents. To clean the filter, remove the back cover by pressing down the two clips. Remove the filter from the back cover and clean it. - Page 10 Altise reserves the right to alter specifications or appearances without notice. Dispose of packaging responsibly – recycle where facilities are available. A division of Shriro Australia Pty Ltd 104 Vanessa St Kingsgrove NSW 2208 In Australia: 1300 795 572 In New Zealand: (09) 415 6000 www.omegaaltise.com IM Ref: OACHB24W 2019-04-11...