Advertisement
4-5.Connect the electric plug of the AC
adaptor to an outlet.
Controller
12V
4-4
DC 12V
IN
* In order to prevent the DC plug from
coming out unintentionally, we recom-
mend wrapping the power cord once
around the body leg (as shown) before
connecting.
4-6.Turn on the controller power.
The driver returns to its default
position.
4-7.Adjust the position of the fan.
4-7-1. Loosen the wing nut to loosen
the tension of the belt.
4-7-2. In order to position the fan verti-
cally, hold the pulley on the driver
side with one hand (1) so that it
does not move, and then rotate
the pulley on the fan side with
your other hand (2).
AC adaptor
4-5
AC
The assembly is now complete.
Driver side
Wing nut
Fan side
(2)
Resonator
NOTE
Perform this setting for both the natural and the
accidental tone side.
4-8.Tighten the wing nut firmly.
In the case of the YVD10
Prepare the power supply in the same
way as Steps 4-3 to 4-5 (page 18).
YVD20 YVD10 Owner's Manual
(1)
Driver side
pulley
Fan side pulley
Fan
19
Advertisement
