Hitachi C42 Instruction Manual page 9

Probe
Table of Contents

Advertisement

(1)
A biopsy should be performed only by a well-trained
physician.
(2)
Use only the authorized needle guide bracket for performing
a biopsy.
(3)
Confirm that the name of the needle guide bracket to be
attached to the probe corresponds to the name of the bracket
displayed on the monitor. Otherwise there is a risk of injury
due to biopsy failure caused by the use of the wrong type
of needle guide bracket.
(4)
"Puncture Adapter Select" window appears on the first use,
and the selected bracket is automatically selected after the
first use. If the bracket is changed to the other bracket,
please change the name of the bracket displayed on the monitor
to the name of the other bracket. Otherwise there is a risk
of injury due to biopsy failure caused by the use of the wrong
type of needle guide bracket.
(5)
Before performing a biopsy, display the needle echo in
sterile water, and confirm that the needle echo at each angle
overlaps with the correspondent needle guideline. For the
confirmation procedure in detail, refer to the instruction
manual of EZU-PA532.
CAUTION
CAUTION
-3-
Q1E-EP1359

Advertisement

Table of Contents
loading

Table of Contents