Page 1
Operation Manual for Teacher Tracking Camera HV-55 User Manual www.hameco.eu...
Page 2
HV-55 User Manual HV-55 User Manual PRECAUTIONS This manual details functions, installation, operation principles and methods of teacher tracking camera. Please read this manual carefully before installation and use. 1, How to use In order to prevent this product or products connected to it from being damaged, please use it within its prescribed scope of use.
Page 3
HV-55 User Manual 5, Install with caution 1) Do not rotate the camera head violently, otherwise it may cause mechanical malfunction; 2) This product should be placed on a stable desktop or other horizontal surfaces. Do not install the product obliquely, otherwise it may display an inclined image;...
HV-55 User Manual 1. SYSTEM OVERVIEW 1.1 System introduction Teaching tracking camera system solution is a dedicated smart camera solution leading in the inter- national education information industry. Teaching tracking camera products feature a built-in high speed processor and advanced image processing and analytical algorithm, which allows it to track and detect teachers, students and black- board-writing accurately and quickly.
HV-55 User Manual 1.3 Product features • Full HD image: With 1/2.8 inch high quality image sensor, its maximum resolution ratio reaches 1920x1080 • Multiple optical zoom lens: 12X and 20X optical zoom lens are available. The lens features 72.5°...
HV-55 User Manual 2. PORT INTRODUCTION Front view Rear view: SDI model 6. RS-232 control port 1. Close-up lens 2. Panorama lens 7. Audio input port 3. LAN network port for panorama lens 8. LAN network port for close-up lens 4.
HV-55 User Manual 4. SYSTEM CONNECTION 4.1 Installation layout Space for installation of student-tracking Space for camera, student status detection camera blackboard-writing and student binocular camera detection and camera Blackboard Platform Student area Space for installation of teacher tracking camera,...
HV-55 User Manual Teacher tracking camera is installed 1.8-2.5m from the ground (distance from panoramic lens to ground), 5-15m from blackboard (when the distance is 5-9m, 4mm panoramic lens is recommended; when distance is 9-15m, 6mm panoramic lens is recommended). Teacher tracking camera should be installed near central axis of the classroom as much as possible to get the best result of tracking cam- era shooting.
HV-55 User Manual 5 CONFIGURATION TOOLS 5.1 Set IP address of the tracking machine Open IVESmart configuration tool, click Settings -> IP address -> Search successively (refer to Figure 5.1-1 for details), the configuration interface will display all valid devices in the LAN, check type of device to be configured and click Confirm.
Page 13
HV-55 User Manual Here, the following is a description of settings according to the process. The main interface of config- uration tool is shown in Figure 5.2-1. Figure 5.2-1 Operation interface www.hameco.eu...
Page 14
HV-55 User Manual 1. Set preset position for close up Operation interface of setting preset position for close up is shown in Figure 5.2-2. Box indicated by arrow has a holder control button. By controlling holder position and zoom value, it will adjust camera angle and position to preset position and save.
Page 15
HV-55 User Manual Figure 5.2-3 Operation interface Tracking area: Tracking area means scope of tracking teacher. When the tracking target goes out of the tracking area, the tracked target will be lost. The tracking area can be set into a polygon according to certain environment conditions, or set student area outside of tracking area.
Page 16
HV-55 User Manual Mask area: Mask area is usually the area which may impact the result of teacher tracking, such as plac- es which may have dynamic changes for example TV, projector, doors and windows. See Figure 5.2-5: Figure 5.2-5 Operation interface 3.
Page 17
HV-55 User Manual Tracking settings: Auto zoom: In open mode (checked), during tracking, the camera will zoom automatically according to target distance; in off mode (unchecked), during teacher tracking, zoom remains the value set during platform preset. V-move: In open mode (checked) and during teacher tracking, the camera will adjust its angle of eleva- tion according to height of tracking target;...
HV-55 User Manual Figure 5.2-5 Operation interface For settings of action code, refer to “7 Description of connecting recording and broadcasting host”. After setting, click Save Parameter. It allows to the user enter advance parameter settings in the col- umn to change configuration value to obtain the best result subject to specific scenes and customer demand.
HV-55 User Manual When upgrading, note whether camera to be upgraded is the close-up camera or panorama camera, then click Select file -> upgrade, the following interface appears: After upgrading is completed, the camera will perform self-inspection. Note: After grading, you can restore factory settings by combination key [*] [#] [6] on remote control or by remote control menu.
HV-55 User Manual Figure 6.1-1 Operation interface 2. Command Type Command Start teacher tracking 0x810x0A 0x08 0x01 0x020xFF Stop teacher tracking 0x81 0x0A 0x08 0x01 0x03 0xFF 6.2 Action code docking Tracking status of teacher tracking camera will be fed back to recording and broadcasting host via network (UDP transmission mode) or concentrator (RS232 serial port) in the form of an action code.
Page 21
HV-55 User Manual Figure 6.2-1 Operation interface 2. Configure action code Edit action code as needed via IVESmart configuration tool. Click Configuration -> advance parameters successively; After modification, click Confirm -> save parameters, as shown below: Figure 6.2-2 Operation interface...
HV-55 User Manual 7 DESCRIPTION OF REMOTE CONTROL 7.1. Description of keys 1. Standby key Long press standby key for 3seconds, camera enters standby mode, press this key again for 3second, camera will perform self-inspection again and return to HOME position. When setting #0 as preset, when there is no action within 12second, the holder will return to #0 preset.
HV-55 User Manual 7.2 Use remote control After the camerastarts normaly, it receives an infrared command and executes. Press down remote control key, receiving indicator of remote control flashes, release the key, the indicator stops flashing. User can set preset, read position, horizontal and vertical motion by infrared remote control.
HV-55 User Manual Language settings / Language: Select menu language, Chinese/English Settings: Enter submenu of system parameter settings Camera parameters: Enter submenu of camera parameter settings P/T/Z: Enter submenu item of holder parameter settings Version: Enter submenu of Version Restore default: Enter restore default, select “yes”...
Page 26
HV-55 User Manual Exposure: Enter exposure submenu item Image: Enter image submenu item Color: Enter color submenu item Focus: Enter focus submenu item Noise reduction: Enter noise reduction submenu item Style: Default, standard, clear, bright,gentle 1) Exposure On CAMERA menu, move the cursor to (EXPOSURE), press [HOME] key to enter exposure page, as shown below.
Page 27
HV-55 User Manual Flicker: Options: Off, 50Hz, 60Hz (valid in auto, shutter priority and brightness priority modes) G. Limit: Options: 0~15(valid in auto, shutter priority and brightness priority modes) Shutter priority: Options: 1/25, 1/30, 1/50, 1/60, 1/90, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/1,000, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000 (valid in manual and shutter priority modes) Aperture priority: Options: Off, F11.0, F9.6, F8.0, F6.8, F5.6, F4.8, F4.0, F3.4, F2.8, F2.4, F2.0, F1.8...
Page 28
HV-55 User Manual Brightness: Options: 0~14 Contrast: Options: 0~14 Sharpness: Options: 0~15 Flip-H: Options: on/off Flip-V: Options: on/off B&W-Mode: Options: color, black&white Gamma: Options: default, 0.45, 0.50, 0.55, 0.63 Dzoom: Options: on/off DCI: dynamic contrast, options, off, 1~8 4) Focus On CAMER menu, move the cursor to (FOCUS), press [HOME] key to enter FOCUS page, as shown below.
HV-55 User Manual 5) Noise reduction On CAMERA menu, move the cursor to (Noise reduction), press [HOME] key to enter Noise reduction page, as shown below. NR-2D: Options: auto, off, 1~7 NR-3D: Options: off, 1~8 Dynamic hot pixel: Options: off, 1~5 8.
HV-55 User Manual 8. 5 Video format On the main menu, move the cursor to (VIDEO FORMAT), press [HOME] key to enter VIDEO FORMAT page, as shown below. Note: only when rotation dial-up is at F will ST model menu show this item.
HV-55 User Manual Note: If remote address used before is not 1, but any one from 2, 3 and 4, after restoring all parameters or system parameters, device address corresponding to the remote control will be reset to 1. At that moment, that remote control address should be set to 1, that is, press Camera and select [1], and control will function.
Page 32
HV-55 User Manual Input/output port and support protocol SDI Model: SDI, LAN, 2-channel 3.5mm linear audio input, RS232 (input) Ports HDMI/U3 Model: HDMI (support video and audio output), USB3.0, LAN, 2-channel3.5mm linear audio input, RS232 (input) 100M internet access (10/100BASE-TX) 5GWiFi(optional), support network VISCA...
HV-55 User Manual Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Query Pan Position 0x51 0x00 0x00 Query Pan Position Value High Value Low 0x59 Response Byte Byte Query Tilt Position 0x53 0x00 0x00 0xFF Adress 0x00 Query Tilt Position...
HV-55 User Manual Function Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Byte8 Query Tilt 0x53 0x00 0x00 Position Query Tilt Value High Value Low Position 0x5B Byte Byte Response 0xA0 Adress 0x00 0xAF Query Zoom 0x55 0x00 0x00 Position...
Page 44
HV-55 User Manual d. Check if menu exits. It only works when menu exits; if webpage outputs image, it will not display the menu or perform any operation. Menu exits in 30sesond automatically. Remote control works. 5) Serial port is out of control Solution: a.
HV-55 User Manual PRODUCT DISPOSAL Safety For your own safety, this product should only be used with CE and RoHS approved equipment. Using this product with non-approved equipment would void the warranty. Disposal of your product Municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials to reduce the impact on human health and the environment.