U-Line H-1394 Installation And Operating Instructions Manual page 4

6" SWIVEL CASTER
The 6" Swivel Casters provide easier rolling over uneven
surfaces. 6 x 2" (152mm x 51mm) casters add 1⁄"
(38mm) to conveyor height. (See Figure 3)
Caster 6 x 2
Brake
Figure 3
AXLE CONNECT HOOKS
Axle Connect Hooks link two or more conveyors together
to serve as one continuous conveying surface.
(See Figure 4)
Figure 4
Operating Instructions
Axle Connect Hooks link two or more conveyors. Simply
push the conveyors together and engage the Axle
Connect Hooks located on the last or end axle of
the conveyor onto the first or end axle of the mating
conveyor.
DESCRIPTION
Axle Connect Hooks
NOTE: Two Axle Connect Hooks are required.
PAGE 4 OF 21
PRODUCT OPTIONS CONTINUED
Caster 6 x 2
Non-Brake
Axle Connect Hook
ULINE PART NO. MFG. PART NO.
-------------- 60277
IMPACT SUPPORT SECTION
The Impact Support Section is a built-in support on
the infeed end of the conveyor where packages are
loaded onto the conveyor. (See Figure 5)
Standard Roller
Angle (Fig. A)
A
B
Figure 5
NOTE: The Impact Support Section can be built
in any length required for custom applications.
LEG CONNECT HOOKS
Leg Connect Hooks link two or more conveyors together
to serve as one continuous conveying surface.
(See Figure 6)
Figure 6
Operating Instructions
Leg Connect Hooks link two or more conveyors. Push
the conveyors together and engage the Leg Connect
Hooks located on each side of the conveyor legs onto
the Leg Connect Bolts located on each side of the
mating conveyor.
DESCRIPTION
Kit, Leg Connect Hooks,
5" Axle Centers
Kit, Leg Connect Hooks,
4" Axle Centers
Kit, Leg Connect Hooks,
3" Axle Centers
Impact Roller
Angle (Fig. B)
Impact Roller
Angle Section
Leg Connect
Bolt
Leg Connect
Hook
Conveyor Leg
ULINE PART NO. MFG. PART NO.
-------------- 06301-4
-------------- 06301-3
-------------- 06301-2
1017 IH-1394