Your Cooker Hood's Specifications - Baumatic BT09.4SS Instruction Manual

Specifications of your BT09.4SS Cooker Hood
Congratulations on purchasing a Baumatic Cooker
Hood!
To fully enjoy using your appliance long into the future,
please firstly familiarise yourself with its specifications,
safety advice and operational instructions included in this
manual. You will also need this manual to ensure that your
Cooker Hood has been installed properly.
DIMENSIONS
Width:
Depth:
Height:
Your stainless steel Cooker Hood is fitted with
• Slider control operation
• 2 Metallic grease filters
• 3 speeds
• 2 lights
Extraction capacity – 290 m
Optional Extra:
NOTE:
PLEASE NOTE THAT YOUR BAUMATIC COOKER HOOD CAN BE USED
EITHER IN RECIRCULATION MODE OR IN EXTRACTION MODE. TO USE THE HOOD
IN RE-CIRCULATION MODE, YOU WILL NEED TO FIT THE CARBON FILTER.
IF YOU WANT TO USE YOUR COOKER HOOD IN EXTRACTOR MODE, YOU WILL
NEED TO FIT DUCTING (DIAMETER OF 125MM) TO THE SPIGOT (SEE
INSTALLATION DIAGRAM) AND WORK IT THROUGH A HOLE OF 130MM SO THAT IT
IS EXPELLING FUMES THROUGH A DEDICATED FLUE SYSTEM THAT ISN'T
COMBINED WITH OTHER EXHAUSTS.
3
600 mm
478 mm (extended), 278 mm (encased)
135 mm
/hr
³
1 x B1 Carbon filter for air recirculation.
: