Before Using Your Fridge-Freezer - Baumatic REFLEX Instruction Manual

Baumatic reflex: user manual
Hide thumbs Also See for REFLEX:
Table of Contents

Advertisement

UPON DELIVERY:
When your Fridge-Freezer has been delivered, you will
need to wait approximately 8 hours before turning it on.
The refrigerant in the compressor needs time to settle.
PLEASE DO NOT PLUG OR SWITCH ON THE APPLIANCE
ANY EARLIER THAN THIS!
NOTE:
THERE CAN BE AN ODOUR WHEN
YOU FIRST SWITCH ON THE
APPLIANCE. IT WILL VANISH
WHEN THE UNIT STARTS
COOLING.
SITUATING YOUR FRIDGE-FREEZER
: DO NOT PLACE THE APPLIANCE NEAR HEAT SOURCES,
CAUTION
AND LEAVE AT LEAST 5CM OF SPACE ABOVE THE UPPER SECTION
AND 5 INCHES (12.7 CM) BETWEEN THE REAR OF THE APPLIANCE
AND THE WALL BEHIND IT.
FOR FULL INSTALLATION ADVICE, PLEASE SEE PAGE 21
MAKE A NOTE OF THE LOCATION FOR YOUR NEW FRIDGE-FREEZER. MAKE
SURE THAT IT WILL FIT PROPERLY AND ENSURE THAT:-
1)
The doors can open freely and completely.
2)
You can access your food conveniently.
3)
There is sufficient space at the back for the cooling coils to
give off heat safely & that they do not touch the plug (see SAFETY
SECTION).
We recommend that you
have the Fridge-Freezer
delivered near to where you
plan to install it so that the
refrigerant can settle.
6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents