Description Of The Product Features - Baumatic RETRO3 Instruction Manual

Description of the product features

1) Shelves
o The shelves may be placed in any of the guide slots within the
interior of the appliance. They are protected from sliding out.
o To remove a shelf: Take off all of the items that are stored on
the shelf that you want to remove. Then lift the front of the shelf
and carefully pull it out of the grooves.
2) Defrost water outlet
o The interior of the refrigerator is cooled by the cooling plate that
is on the rear wall. Beneath this there is a channel and an outlet
for the defrost water.
o It is important that this channel never becomes clogged, see
"Defrosting the refrigerator compartment" for a detailed
explanation of how to keep the channel clear.
3) Salad crisper drawers and cover
o The salad crisper drawers are in the bottom of your refrigerator
and there is a cover that goes over them.
o The cover helps to prevent fruit and vegetables from drying out
prematurely.
4) Door shelves
o The door liner holds various shelves, which are suitable for
storing eggs, cheese, butter and yogurt. As well as smaller
packages, tubes, cans etc.
5) Bottle shelf
o The lowest door shelf should be used for storing reasonably sized
bottles.
o IMPORTANT: IT IS IMPORTANT THAT NONE OF THE
SHELVES THAT SIT IN THE DOOR ARE OVERLOADED, AS
THIS WILL DRASTICALLY REDUCE THEIR WORKING LIFE.
6) Freezer compartment
o A freezer section, with a net capacity of 56 litres
(RETRO3BL/IV) or 83 litres (RETRO4BL/IV).
11