Advertisement
INSTALLATION INSTRUCTIONS – BF360 FRIDGE-FREEZER:
Allow for adequate space and install your fridge-freezer
1)
on a firm, level floor. This is very important as the appliance
must be level so that there will be no unnatural noises or
poor cooling.
Ensure that you are going to be placing your fridge-
2)
freezer away from heat sources and in a well-ventilated
position. This should be at least 50 cm from radiators, gas
or coal stoves and 5 cm away from electric stoves. Do not
place the appliance in the path of direct sunlight.
Make sure that the plug is accessible after positioning
3)
your fridge-freezer.
Keep a space of 15cm above your fridge freezer.
4)
You need 5 inches
5)
clearance between the
rear of your appliance
and the wall behind it.
Fit the plastic wall
spacers to the
condenser at the back
of the refrigerator.
If placing beside another refrigerator or freezer, keep at
6)
least 2cm between the units to prevent condensation.
Gently move the appliance into place or, in the case of
7)
installing in a unit, into its housing.
Your fridge-freezer
8)
has adjustable feet so you
will be able to level it to the
surface on which you want
to install it. Simply turn
each foot to either raise or
lower it.
14
This will maintain
good performance.
Advertisement
