P O W E R I N G
DESCRIPTION
UNIPOWER's UNIFLEX
provide the ultimate flexibility in combining
fuses, circuit breakers and/or an LVD in a dual
(A/B) panel. A GMT section provides 10 fuses
and a circuit breaker section, 1-6 breakers.
A low-voltage disconnect section is
configured at the factory for either battery
or load disconnect and can have an optional
bypass switch. A battery circuit breaker is
standard.
Each A and B section has an LED alarm
indicator and Form C relay contacts.
The A and B Sections are isolated and can be
configured independently at the factory for
12, 24 or 48 VDC, positive or negative ground.
The panels are only one mounting position
(1.75 inches) high and come with brackets
that permit mounting in either a 19- or
23-inch relay rack. They can be mounted
from the front of the rack with offsets every
quarter-inch from front to back to align with
existing rack mounted equipment.
THREE YEAR WARRANTY
SAFETY CERTIFICATIONS
UL1950
CSA22.2, No. 950-95
www.unipowerco.com
North America & CALA: +1 954-346-2442 • EMEA: +1 561-990-3830 • sales@unipowerco.com
T E C H N O L O G Y
distribution panels
®
DPU1U SERIES
UNIFLEX
COMBINATION PANELS
®
Breakers | Fuses | LVD
AVAILABLE CONFIGURATIONS
BASE
SIDE
MODEL
A
DPU1U
B
Note: Each side of the panel can be configured for only
one of the available 'types' as shown. To specify a
complete model number see the configuration
guide on the following page.
FEATURES
One Mounting Position High: 1.75"
19- or 23-Inch Rack Mounting
Dual Section (A/B)
Current Capacity per Section: 60A to 150A
Operating Voltage: 12, 24 or 48VDC
Positive or Negative Ground
A & B are Isolated Loads
LED Alarm Indicators
Form C Relay Contacts, Each Side
Combination of GMT Fuses, Breakers, LVD
1A to 50A Circuit Breakers
LVD has Battery Circuit Breaker
LVD in Series with Battery or Load
Rack Offset Every ¼" from Front to Back
E210994
LVD2006/95/EC
ROHS2011/65/EU
TOTAL
TYPE
AMPS
80
10 x GMT Fuses
150
1-6 x Breakers
80
10 x GMT Fuses
150
1-6 x Breakers
70
1 x LVD