Table of Contents
Advertisement
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
DISPLAY
Channel
4. To change the Category,
press
to move to the Next Category or
2
press
5
to go back to the Previous Category.
Note: Pressing
2
the Service Menu displayed.
5. To change the adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value,
3
press
to increase the Data Value or
6
to decrease the Data Value.
7.
Press MUTING then press
8. To exit service mode, press HOME or turn the TV power off.
KDL-32EX707/40EX707/46EX707/52EX707
+
POWER
Volume
or
only changes the Categories within
5
0
to Write the changes.
SERVICE ADJUSTMENTS
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
OR THE LCD PANEL
The following procedures must be completed after replacing the BAL
Board or the LCD panel.
Update the TV to the latest software version
Select the Model
Select the Destination
Verify model and panel information are correct
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the
software to the latest version.
Before you begin
Disconnect all cables (RF, External input, Ethernet, etc.) from
the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to "Selecting the
Model".
20
Advertisement
Table of Contents
