Getting Started; Installing And Removing The Battery - NEC TalkTime Max 962 Owner's Manual

GETTING STARTED

Your phone is powered by a rechargeable battery.
A new battery must be fully charged before being
used for the first time.
If left unused, a fully charged battery will discharge itself in about a month. Store
batteries uncharged in a cool, dark, and dry place.
The battery pack is a sealed unit with no servicable parts inside. Do not attempt to
open the case.
WARNING: Use only NEC approved batteries, antennae and chargers. The
use of any other types will invalidate any approval or warranty applying to the
telephone.

INSTALLING AND REMOVING THE BATTERY

To Install the Battery:
1. Insert the bottom of the battery into the base of the phone.
2. Fasten it to the phone by pressing slightly downwards on the battery until the
locking catch snaps into place.
3. Make sure the battery is properly installed.
To Remove the Battery:
Remember to switch the power off before removing the battery.
1. Slide the locking latch located at the top of the battery upward and gently pull
the battery away from the phone.
-2-