Indicator
Name
Electric Power
Steering (EPS)
System Indicator
Low Tire Pressure/
TPMS Indicator
Turn Signal and
Hazard Warning
Indicators
High Beam
Indicator
On/Blinking
Comes on when you set the
●
power mode to ON, and goes off
when the engine starts.
Comes on if there is a problem
●
with the EPS system.
Comes on for a few seconds
●
when you set the power mode to
ON, then goes off.
Comes on if the tire pressure of
●
any of the tires becomes low.
Blinks for about one minute, and
●
then stays on if there is a problem
with the TPMS with Tire Fill
Assist, or when a compact spare
tire is temporarily installed.
Blinks when you operate the turn
●
signal lever.
Blink along with all turn signals
●
when you press the hazard
warning button.
Comes on when the high beam
●
headlights are on.
Explanation
Stays on constantly or does not come on
●
at all - Have your vehicle checked by a
dealer.
2 If the Electric Power Steering (EPS)
System Indicator Comes On P. 559
Comes on while driving - Stop in a safe
●
place, check tire pressures, and inflate the
tire(s) if necessary.
Blinks and remains on - Have your vehicle
●
checked by a dealer. If the vehicle is fitted
with a compact spare tire, get your regular
tire repaired or replaced and put back on
your vehicle as soon as you can.
Does not blink or blinks rapidly
●
2 Replacing Light Bulbs P. 511, 512
—
uuIndicatorsu
Message
—
—
Continued
85