Installation; Living Room - HIKVISION DS-PDSMK-S-WE Quick Start Manual

3
Enrollment
Enroll the Detector Locally
1
1. Log in the Hik-ProConnect, and select a site.
2. Select the AX PRO in the site.
3. Enter"Settings-System Settings" , and tap the "Enrollment Mode" button to make the
AX PRO enter the enrollemnt status.
2 Register the Detector via APP
1. Log in the Hik-ProConnect, and select a site.
2. Select the AX PRO in the site.
3. Tap the "+" icon on the bottom of the page, and scan the QR code to add the peripheral.
4. Turn the power switch of the peripheral on, and it will be automatically enrolled to the control panel.
Format
3
Hold the coding button and power the detector on at the same time. The detector will be formatted after 8 s.
4

Installation

Equipment
1
Before commencing installation, ensure all equipment and tools to mount and test the device are available, such as drills, mounting screws (supplied), cables
and ladders.
Location Selection
2
Location and number of smoke alarms may be specified in relevant regulations. Where these do not exist, the requirements of DIN 14676 can be used.
According to German application standard DIN 14676
xxxx
Device
BEDROOM
CHILDREN'S CHILDREN'S
BEDROOM
BEDROOM
Figure 1 a) Example of the application in a flat
BATH-
KITCHEN
ROOM

LIVING ROOM