Change C Register, Standby - Motorola MC145220EVK Manual

Change C Register, Standby

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005
This is the resulting screen that is displayed after the user selects the '[N] Change C Register and Pres-
cale' and then the '[6] Change standby' command. The user is provided a submenu to select from. This
submenu contains commands to toggle the standby state setting.
The standby state setting is displayed as 'Normal operation' or 'Standby', depending on the current set-
ting.
The user can select the [0] and [1] menu options to toggle the standby state setting.
If the [Q] command is selected, then the user is returned to the main menu.
Available Boards – Current target board is: A, MC145220 Dual
Brd [A]!: MC145220 Dual
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Evaluation program modifies Standby on both PLL's for this board.
Change C Register, Standby – Currently: Normal Operation
[0]! Normal operation
[1]! Standby
[Q] to return to previous menu
This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the "Define boards to program" screen, press [Q]! . This will
place you in the "Select from the available options" screen. In this screen, press [N]. This will place you
in the "Change C Register and Prescale" screen. To access the screen above, press [6].
This sequence to access the "Change C Register, Standby" screen works the same for any selected
board in the "Define boards to program" screen.
MC145220EVK
30
Freescale Semiconductor, Inc.
Welcome to MC145xxx EVK Demonstration Program, rev 4.0
Change C Register, Standby
Brd [–]!: N/A
[X]! Terminate demonstration program. [?]! View help screen.
For More Information On This Product,
Go to: www.freescale.com
Brd [–]!: N/A
MOTOROLA