Battery Low; Auto Battery Save; To Select A Channel - Cobra MicroTALK PR561 BLT Owner's Manual

All manuals and user guides at all-guides.com

Battery Low

When battery power is low, the final bar in the Battery
Battery Low
Low icon will blink and an audible tone will sound twice
before the radio shuts off. Your batteries should be
replaced or recharged, if using rechargeable batteries.

Auto Battery Save

If there are no transmissions within 10 seconds,
Battery Save Mode
the radio will automatically switch to Battery Save
mode and the Power Saver icon will flash in the
display. This will not affect the radio's ability to
receive incoming transmissions.
Communicating with Another Person
1. Press and hold the Talk button.
Talk Button
2. With the microphone about two inches (5 cm) from
3. Release the Talk button when you are
Two Inches (5 cm)
from Mouth
You cannot receive incoming calls while
pressing the Talk button.

To Select a Channel

With the radio on, select any of the 22 channels by
Channel Button
pressing the Channel Up or Channel Down button.
Channels 1 through 7 are shared with FRS/ GMRS.
Channel Number
Channels 8 through 14 are FRS only. Channels 15
through 22 are GMRS only.
The radio will display flashing battery icon
while charging.
your mouth, speak in a normal voice.
finished talking and listen for a response.
Both radios must be tuned to the same
channel/privacy code to communicate.
Both radios must be tuned to the
same channel to communicate.
See page 21 for FRS/GMRS frequency
allocations and compatibility charts.
•
•
•
•
3