AEG L7FBE942CA User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L7FBE942CA
  6. User manual

AEG L7FBE942CA User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
L7FBE942CA
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG L7FBE942CA

Summary of Contents for AEG L7FBE942CA

  • Page 1 L7FBE942CA User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    9. THE AUTODOSE TECHNOLOGY (AUTODOSING).......... 22 10. PROGRAMMES....................29 WI-FI - CONNECTIVITY SETUP..............34 12. DAILY USE....................... 36 13. HINTS AND TIPS....................40 14. CARE AND CLEANING..................42 15. TROUBLESHOOTING..................49 16. CONSUMPTION VALUES................54 17. QUICK GUIDE....................57 My AEG Care app...

  • Page 3: Safety Information

    ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept •...

  • Page 5: Safety Instructions

    ENGLISH Old hose sets must not be reused. • If the mains power supply cable is damaged, it must • be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons to avoid an electrical hazard. Before any maintenance operation, deactivate the •...
  • Page 6 • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.

  • Page 7: Product Description

    ENGLISH valves, filters and aquastops, printed • Disconnect the appliance from the circuit boards, electronic displays, mains electrical and water supplies. pressure switches, thermostats and • Cut off the mains electrical cable sensors, software and firmware close to the appliance and dispose of including reset software, door, door hinge and seals, other seals, door •...

  • Page 8: Technical Data

    3.2 Appliance overview 11 12 Worktop Feet for levelling the appliance Detergent dispenser with AutoDose Drain hose tanks and manual compartments Inlet hose connection Control panel Mains cable Door handle Transit bolts Rating plate Hose support Drain pump filter...

  • Page 9: Installation

    ENGLISH Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa) Cold water Water supply Maximum Load Cotton 9 kg Spin Speed Maximum spin speed 1351 rpm 1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannot connect the water inlet hose to the cold water tap of the primary hydraulic system, connect it to your do‐...
  • Page 10 5. Carefully put the appliance down on It is possible to see its rear side. water flowing from the 6. Put the front polystyrene packaging drain hose. This is due element on the floor under the to the testing with water appliance.
  • Page 11 ENGLISH To limit vibration we recommend placing When the machine is a waterproof wooden panel, at least 15 installed on a plinth or if a mm thick, under the appliance. It should washer dryer is stacked on be screwed to at least 2 floor beams and the washing machine, use should extend beyond the front feet.
  • Page 12 1. Make a U shape with the drain hose and put it around the plastic hose guide. 2. On the edge of a sink - Fasten the CAUTION! guide to the water tap or to the wall. Make sure that there are no leaks from the couplings.

  • Page 13: Accessories

    6. ACCESSORIES 6.1 Available in Only appropriate www.aeg.com/shop or from accessories approved by authorised dealer AEG ensure the safety standards of the appliance. If Read carefully the instructions supplied unapproved parts are used, with the accessory. any claims will be...

  • Page 14: Control Panel

    If you install the appliance on a plinth under the washing machine. that is not an accessory supplied by Verify the compatible AEG, secure the appliance in the fixing stacking kit by checking the plates. depth of your appliances. Read carefully the instructions supplied with the accessory.
  • Page 15 ENGLISH The options are not selectable with all washing programmes. Check the compatibility between options and washing programmes in the "AutoDose and options compatibility with programmes" paragraph in the "Programmes" chapter. An option can exclude another one, in this case the appliance doesn't allow you to set the incompatible options together.
  • Page 16 Press this button repeatedly to activate one of the two options or both. The relevant indicator comes on. • Intensive By setting this option, the indicator appears close to deter‐ gent symbol, and the appliance will automatically dose an ex‐...
  • Page 17 ENGLISH Press this button repeatedly to activate one of the two options or both. The relevant indicator comes on in the display. • Remote Select this option to connect appliance with App. Touch this button, the display shows the indicator blink‐...
  • Page 18 When you set a programme, the appliance automatically selects the maximum spin speed. Touch this button repeatedly to: • Decrease the spin speed. The display shows only the spin speeds avail‐ able for the set programme. • Activate the Rinse Hold option .
  • Page 19 ENGLISH By means of Spin touch button, you can also set: • Drain Only Activate the drain-only option (Skipping the wash, rinse and spin phases): The appliance performs the only draining phase of the selec‐ ted washing programme. The display shows the indicator (cold), the indicator (no spin) and the indicator •...
  • Page 20 With this option you can prevent that the children play with the control panel. To activate/deactivate this option, touch the Intesive/Prewash and the Time Save buttons simultaneously until the indicator comes on/goes off on the display. You can activate this option: Child Lock •...
  • Page 21 ENGLISH Delay start indicator. Door locked indicator. Child safety lock indicator. The digital indicator can show: • Maximum load indicator: e.g. Cottons . The icon flashes dur‐ ing laundry load estimation. Refer to "ProSense load detection" para‐ graph. • Programme duration: e. g. •...

  • Page 22: Before First Use

    AutoDose liquid detergent tank indicator. When it lights, appliance auto‐ matically doses the detergent. This indicator appears beside when Intensive option is set. AutoDose softener tank indicator. When it lights, appliance automatically doses the softener. AutoDose status indicator. It lights when AutoDose function for additives is disable.
  • Page 23 ENGLISH 9.2 Detergent dispenser with AutoDose tanks and manual compartments When using detergent and any other treatments, always follow the instructions that you find on the packaging of the detergent products. Anyway, we recommend not to exceed the maximum indicated level in each compartment ( AutoDose detergent tank.
  • Page 24 However, under extreme conditions (very soft or very hard water) and particular type of detergent (such as super compact), we recommend to adjust the pre-set dosage by following the indication given on detergent and fabric softener container: e.g when using super compact detergent you may need to reduce the pre-set dosage considerably.
  • Page 25 ENGLISH 9.4 AutoDose configuration adjust the dosage upwards and the mode Spin button to adjusts it downwards. Minimum step is 1 ml. Enter the AutoDose configuration mode before proceeding with any programme setting. The configuration mode may cancel temporary settings . 1.
  • Page 26 3. Gently pour only liquid detergent in 6. Gently close the detergent dispenser, till click engagement. the AutoDose detergent tank . Fill up to the maximum indicated level 9.6 AutoDose low level indication 4. Gently pour only liquid softener in the AutoDose fabric softener tank .
  • Page 27 ENGLISH deactivated the AutoDose tanks If the tanks are filled before completely. the appliance is powered on Once you have entered the AutoDose for the first time, the configuration mode by pressing AutoDose indicator will not Temperature and the Spin blink.
  • Page 28 2. Pour the liquid detergent in the 3. If desired, pour the fabric softener in compartment the compartment Manual 3. Gently close the detergent dispenser, 4. Gently close the detergent dispenser, till click engagement. till click engagement. If the machine has not been...

  • Page 29: Programmes

    ENGLISH This will happen even if the user turned To restart the programme, ensure the AutoDose off. drawer is properly closed and press Start/Pause button. 10. PROGRAMMES 10.1 Programme Chart Washing programmes Programme Programme description Washing programmes White cotton and coloured cotton. Normally, heavily and lightly soiled items.
  • Page 30 Programme Programme description Cotton and synthetic items lightly soiled or once worn. 20min 3kg Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation.
  • Page 31 ENGLISH Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range 40 °C 1200 rpm 4 kg 60 °C - Cold 1200 rpm - 400 rpm Synthetics 30 °C 800 rpm 2 kg 40 °C - Cold 1200 rpm - 400 rpm Delicates 40 °C...
  • Page 32 10.2 AutoDose and options compatibility with programmes Additional programmes and settings are available downloading the APP. AutoDose ■ ■ ■ ■ ■ ■ ■ ■ AutoDose Detergent ■ ■ ■ ■ ■ ■ ■ ■ AutoDose Fabric Softener Others ■...
  • Page 33 ENGLISH ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Delay Start ■ ■ ■ ■ ■ Plus Steam 1) This option is not available with temperature lower than 40 °C. 2) If you set the shortest duration, we recommend that you decrease the load size. It is possible to fully load the appliance, however the washing results can be less satisfactory.

  • Page 34: Wi-Fi - Connectivity Setup

    This chapter describes how to connect the smart appliance to the Wi-Fi network configuring "My AEG" and to link it to mobile devices. "My AEG" allows you to By this functionality you can receive control your laundry through notifications, control and monitor your a mobile device.
  • Page 35 "My 4. Configure the "My AEG" app on your AEG" . smart device and follow the 5. Follow the instructions on the App for...

  • Page 36: Daily Use

    When touching the Start/ The Remote Control Pause button after the activates automatically when you press the Start/Pause indicator stops button to start the blinking, the Remote Start is programme, but it is also not activated, but the set possible to start a washing programme starts.
  • Page 37 ENGLISH related programme indicator comes The indicator of the Start/Pause button flashes. The display shows an indicative programme duration, the maximum declared load for the set programme (only for a few seconds), the default temperature, the default spin speed and the washing phase indicators (when available).
  • Page 38 When the countdown is completed, the programme duration could increase programme starts. or decrease. At the end of the load detection, if The ProSense estimation laundry load is below the maximum starts at the end of the declared weight for selected countdown.
  • Page 39 ENGLISH 12.11 Opening the door - Adding garments E.g. the rinse phase is running: If you select the Plus Steam the steam phase indicators come on. While a programme or the delay start operates, the appliance door is locked. The steam phase is running: If the temperature and level The anti-crease phase is running: of the water in the drum are...

  • Page 40: Hints And Tips

    When you activate the The option indicator goes off, appliance again, the display while the indicator flashes and then show the end of the last goes off. selected programme. Turn 3. When the programme is completed the programme dial to set a and the door locked indicator new cycle.
  • Page 41 ENGLISH • Turn multilayered fabrics, wool and We recommend that you pre-treat these items with printed illustrations inside stains before you put the items in the out. appliance. • Pre-treat stubborn stains. Special stain removers are available. • Wash stubborn stains with a special Use the special stain remover that is detergent.

  • Page 42: Care And Cleaning

    – the laundry is lightly soiled, • With adequate pre-treatment, stains – there is large amounts of foam and limited soiling can be removed; during washing. the laundry can then be washed at a • When using detergent tabs or pods, lower temperature.
  • Page 43 ENGLISH 14.2 Removing foreign Always follow the objects instructions that you find on the packaging of the Make sure that pockets are product. empty and all loose elements are tied up before 14.5 Maintenance wash running your cycle. Refer to 'The laundry load' in 'Hints The repeated and prolonged use of low and tips'.
  • Page 44 14.7 Cleaning the drum Before cleaning, make sure that the all compartments Regularly examine the drum to prevent are empty. unwanted deposits. Rust deposits in the drum may occur due To prevent possible deposits of dried to rusting foreign body in the washing or...
  • Page 45 ENGLISH 3. Open the drain plugs of each tank and empty them into a sink. CAUTION! Do not use sharp or metal 4. Press the catch on the back as brushes and sponges. indicated in the picture and lift up the 6.
  • Page 46 CAUTION! Press the bottom cover as indicated in the picture. Make sure that it is closed properly. 9. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess.
  • Page 47 ENGLISH Proceed as follows to clean the pump: To restore the functionality, refill tanks with detergent 1. Open the pump cover. and softener. If you place a wrong additives in the tanks, you can easily recover it by using the drain plug on both side of the drawer.
  • Page 48 6. Repeat the steps 4 and 5 until the water stops to flow out. 7. Turn the filter anti-clockwise to remove it. 12. Close the pump cover. 8. If it is necessary, remove fluff and objects from the filter recess.

  • Page 49: Troubleshooting

    ENGLISH 14.11 Emergency drain 2. Remove the inlet hose from the appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate the drain system again:...
  • Page 50 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the...
  • Page 51 ENGLISH • Make sure that the door is properly closed. The appliance door is open or not closed correctly. • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ •...
  • Page 52 Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose have floor.
  • Page 53 ENGLISH Problem Possible solution The display shows • The appliance is downloading any available updates. Wait un‐ til the update process is complete. If you deactivate the appli‐ . All buttons are ance during update, it resumes when you activate the appli‐ inactive, except the the ance again.

  • Page 54: Consumption Values

    Before opening the door: 1. Press the On/Off button to switch the appliance off. CAUTION! 2. Disconnect the mains plug from the Risk of burns! Make sure mains socket. that the water temperature 3. Open the filter flap. is not too high and the 4.
  • Page 55 ENGLISH The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
  • Page 56 Delay start Networked Off (W) Stand-by (W) standby (W) Time to Off/Standby mode is 15 minutes maximum. 1) The energy consumption of the connected function is approximately 17.5 kWh per year. To disconnect this function, please refer to the chapter 'Wi-fi - Connectivity setup'.

  • Page 57: Quick Guide

    ENGLISH Programme Litres h:mm °C Cottons 2.70 4:05 1400 95°C Cottons 1.60 3:50 1400 60°C Cottons 0.35 3:00 1400 20°C Synthetics 0.80 2:15 1200 40°C Delicates 0.40 1:05 1200 30°C Wool 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed. 2) Suitable for washing heavily soiled textiles.
  • Page 58 • To start the programme, touch the AutoDose Start/Pause button (4). • The appliance starts. • At the and of the programme, remove Manual the laundry. • Push the On/Off button to turn the appliance off. (Manual) When using a liquid...
  • Page 59 ENGLISH Programmes Load Product description Steam programme for cotton, synthetic and 1 kg delicate garments. Steam White cotton items. This programme helps to 9 kg remove germs and bacteria. Anti-allergy Cotton and synthetic lightly soiled or once 3 kg worn items. 20min 3kg 2.5 kg Modern outdoor sporting garments.
  • Page 60 LGPL-2.0, LGPL-2.1, zLib, MIT, ISC, Apache 2.0 and others. It is possible to display the complete copy of the licenses in the AEG App that can be downloaded from the corresponding App store from the License menu section. It is possible to download the source code of the open source software used in the product by searching for Wi-Fi Module Software version in NIUX subfolder at the following website: http://aeg.opensoftwarerepository.com.

Table of Contents