Camera shake warning indicator
Due to potential camera shake, the
(Camera shake warning) indicator flashes
in the viewfinder. In this case, use the
Super SteadyShot function, a tripod, or
the flash.
Note
• The
(Camera shake warning) indicator is displayed only in the modes that the
shutter speed is automatically set. This indicator is not displayed in M/S/P
Using the Super SteadyShot function
This Super SteadyShot function can reduce the effect of camera shake by
the equivalent of approximately 2.5 to 3.5 increments of shutter speed.
Set the
• The
(Super SteadyShot scale) indicator
appears. Wait until the scale becomes low,
then start shooting.
46
switch to "ON."
(Camera shake warning) indicator
(Super SteadyShot scale) indicator
modes.
S
switch