Section 3 - Configuration
Configuring a Channel
Click the pencil icon under Operate to add a camera on a channel or to configure an existing channel.
Enter a name to identify the channel.
Channel
Name
Enter the IP address of the camera. If the camera is connected
IP Address
to one of the NVR's PoE ports, it will attempt to detect the IP
address automatically.
Select the protocol to use (e.g. ONVIF).
Protocol
Enter the port used to connect to the camera.
Port
Enter the username used to access the camera.
Username:
Enter the password associated with the username above.
Password:
Designate a channel for the camera's display.
Remote
Channel
D-Link DNR-4020-16P User Manual
13