Table of Contents
Advertisement
[7] ADJUSTMENTS
1. Paper guide position adjustment in the
manual paper feed section
(AR-P350 / P450,
DM-3500 / 4500, DM-3501 / 4501)
A. Correction value entry procedure
1) Turn the main switch on while pressing the [MENU] key and
the [OK] key of the operation panel of the main unit of the printer.
"ON"
2) After pressing the [MENU] key several times to display
"SIZE ADJUSTMENT A" in the message display, press the [
to display "SIZE ADJUSTMENT B" and press the [OK] key.
3) "MAXIMUM SIZE" is displayed.
Since "MAXIMUM SIZE" is displayed with a number, press
the [
] key or the [
] key to change the number so that the
number is equal to the value of [MAX] written on the label(*NOTE)
and then press the [OK] key.
(*NOTE)
Illustration of label sticking position
Label
4) Since "P1 SIZE" is displayed with a number, press the [
the [
] key to change the number so that the number is equal to the
value of [P1] written on the label(*NOTE) and then press
the [OK] key.
5) Since "P2 SIZE" is displayed with a number, press the [
the [
] key to change the number so that the number is equal to the
value of [P2] written on the label(*NOTE) and then press
the [OK] key.
6) Since "MINIMUM SIZE" is displayed with a number, press
the [
] key or the [
] key to change the number so that the
number is equal to the value of [MIN] written on the label (*NOTE)
and then press the [OK] key.
7) Turn off the main switch to cancel the setting mode.
B. Alignment of the guide plate and the size mark
1) Press and hold [MENU] key and [OK] key together, and turn on the
main switch.
2) Press [MENU] key several times until "SIZE ADJUSTMENT A" is
displayed. Press the [
and press [OK] key.
3) "MAXIMUM ISZE" is displayed.
Move the manual feed guide F to the maximum position, and press
[OK] key.
4) "P1 SIZE" is displayed. Move the manual paper feed guide F to the
] key
size mark of A4R on the manual paper feed tray upper, and press
[OK] key.
5) "P2 SIZE" is displayed. Move the manual paper feed guide F to the
size mark of A5R on the manual paper feed tray upper, and press
[OK] key.
(Caution)
Manual paper feed tray upper
] key or
] key or
6) "MINIMUM SIZE" is displayed. Move the manual paper feed guide F
to the minimum position, and press [OK] key.
7) Turn off the main switch to cancel the setting mode.
AR-DU3/DU4/TE3 ADJUSTMENTS-1
"ON"
] key to display "SIZE ADJUSTMENT C,"
Paper size mark
Manual paper feed guide F
Advertisement
Table of Contents
