Hardware Monitor - Asus DSBF-D Series Manual

Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled] Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake-up event.
Configuration options: [Disabled] [Enabled]
The following items appear only if you enable the P o w e r O n B y R T C
A l a r m A l a r m A l a r m item. A l a r m A l a r m
RTC Alarm Date [0] RTC Alarm Date [0] RTC Alarm Date [0] RTC Alarm Date [0] RTC Alarm Date [0]
To set the date of alarm, highlight this item and press <Enter> to display a
date chart. Press <+> or <-> to change scroll through the options, then
press <Enter> when done. The default setting [0] is equivalent to everyday
alarm. Configuration options: [0] [1] ~ [31]
RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00]
RTC Alarm Date [00 : 00 : 00] RTC Alarm Date [00 : 00 : 00]
To set the time of alarm:
1. Press <+> or <-> to set the desired value.
2. Use the left/right arrow key or press <Tab> to move to the next field.
3. Press <Enter> when done.
4.4.8 4.4.8 4.4.8

Hardware Monitor

Hardware Monitor Hardware Monitor
4.4.8 4.4.8 Hardware Monitor Hardware Monitor
This menu shows the hardware monitor configuration settings. Select an
item then press <Enter> to display the configuration options.
Advanced
CPU1 Domain 0 Temperature
CPU1 Domain 1 Temperature
CPU2 Domain 0 Temperature
CPU2 Domain 1 Temperature
SYSTEM1 Temperature
SYSTEM 2 Temperature
CPU_FAN1 Speed
CPU_FAN2 Speed
FRN_FAN1 Speed
FRN_FAN2 Speed
FRN_FAN3 Speed
FRN_FAN4 Speed
REAR_FAN1 Speed
REAR_FAN2 Speed
Smart Fan Control
F1:Help
ESC: Exit
4 - 2 8 4 - 2 8
4 - 2 8 4 - 2 8 4 - 2 8
PhoenixBIOS Setup Utility
Hardware Monitor
39
29
0
0
39
29
2925 RPM
[Smart Fan II]
↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ : Select Item
→← →←
→← →← →←: Select Menu
Enter: Select Sub-menu
o o
C/102 F
o o
C/84 F
o o
C/32 F
o o
C/32 F
o o
C/102 F
o o
C/84 F
N/A
N/A
N/A
N/A
N/A
N/A
N/A
-/+: Change Value
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p C h a p t e r 4 : B I O S s e t u p
P o w e r O n B y R T C P o w e r O n B y R T C P o w e r O n B y R T C
P o w e r O n B y R T C
Item Specific Help
When the current
temperature equals this
limit, the fan will be
turned on IF it is not
already.
F9: Setup Defaults
F10: Save and Exit