Cisco 6000 Series Hardware Installation Manual page 28

Network convergence system

Hide thumbs Also See for 6000 Series:

Installing the Front Exterior Cosmetics

This section describes how to install the front-side exterior cosmetics on the Cisco NCS 6008 chassis. We

recommend that you install the exterior cosmetics in the order outlined in this section.

Prerequisites

Before performing this task, you must unpack and secure the chassis. See the

Convergence System 6000 Series Routers Unpacking, Moving, and Securing Guide.

Required Tools and Equipment

•

For information on the cosmetic PID numbers, see

Cisco Network Convergence System 6000 Series Routers Hardware Installation Guide

3-4

8-inch, number-1 Phillips screwdriver (magnetic head preferable)

Two vertical cable troughs (left and right troughs are interchangeable)

Front upper cable management bracket

Front lower cable management bracket

Front door alignment bracket

Three left door hinge attachments

Three right door hinge attachments

Front doors, left and right

Two door grounding cables

Front top grille

Front bottom grille

Craft panel cover

Chapter 3

Installing the Exterior Cosmetics

Appendix B, "Cosmetic Product

Cisco Network

IDs.".

OL-29234-02