Care And Cleaning; Service And Customer Care - Kenwood CM200 Series Instructions Manual

This appliance conforms to EC
l
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first time
1 Wash the parts: see 'care and
cleaning'.
2 Run two full tanks of water (without
coffee) through the coffee maker to
clean it out. See 'to make coffee'.
key
a permanent filter
b filter holder
c anti-drip valve
d lid tab
e water tank (500 mls)
f on/off button with indicator
g hotplate
h carafe
i measuring spoon
to make coffee
1 Lift the lid using the tab d at the
front of the coffee maker.
2 Fill the tank with the desired amount
of water. The water level must be
between the 2 and 4 cup marks.
Do not fill above the MAX level.
Use cold water. We recommend
l
using filtered water as it reduces
limescale and prolongs the life of
your coffee maker. Never use warm
or fizzy water.
3 Ensure the filter holder is positioned
correctly.
4 Fit either the permanent filter
supplied or a paper filter into the
filter holder. Add the coffee using
the spoon supplied (approximately
1 level spoon (7g) per cup to taste).
5 Close the lid and put the carafe on
the hotplate.
6 Plug in and switch on.
7 Don't remove the carafe until
brewing has finished. When the
carafe is empty, switch off and
unplug the appliance.
Your coffee maker will keep the
l
coffee warm and then switch off
after approximately 40 minutes. The
indicator light will go out when the
keep warm stops. If you want to
continue keeping the coffee warm
then switch the coffee maker off
then back on, the coffee will then
keep warm for another 40 minutes.
If you have not used the appliance
l
for a while, run one full tank of
water (without coffee) through to
clean it out.
care & cleaning
Always switch off, unplug and allow
l
to cool before cleaning.
Don't wash parts in the dishwasher.
l
carafe and lid, filter holder
and permanent filter holder
Wash, then dry.
l
body
Wipe with a damp cloth, then dry.
l
Don't use abrasives - they'll scratch
the plastic and metal surfaces.
to descale
1 Buy a suitable descaler.
2 Descale the machine.
3 After descaling, run at least two
full tanks of water (without coffee)
through the coffee maker to clean it
out.
4 Wash the parts.
service and customer
care
UK
If you need help with:
using your appliance or
l
servicing, spare parts or repairs (in
l
or out of guarantee)
call Kenwood customer care
Z
on 023 92392333 or visit
www.kenwoodworld.com. Have
your model number ready
(e.g. CM200) and date code
(5 digit code e.g. 13L35). They
are located on the underside of your
coffee maker.
spares and attachments
l
Z call 0844 557 3653.
4