Advertisement
A
2
1
D
6
INSTALLATION:
A. Use Mounting Bracket (1) to determine a desired location. Use the Mounting Bracket Holes (2) to mark the
screw hole locations, as shown.
B. If installing into a stud, drill 1/ 8" holes and do not use the Anchors. If installing into drywall, drill two
1/4" holes (3) as shown. Insert Anchors (4) into the holes and tap flush with wall.
C. Install Mounting Bracket (1) by using the screws (5) over the Anchors (4). Mounting Bracket (1) must be vertically
leveled.
D. Place the Mounting Post (6) over Mounting Bracket (1). Orient Mounting Post (6) so that the Ring (7) hangs
down. Secure by tightening Set Screw (8) onto Decorative Post (6). Do Not Over Tighten!
MAINTENANCE AND CARE
Cleaning Instructions:
For all handles and decorative finishes, use only a soft damp cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents, or acid may cause damage. Use of other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain porcelain or other similar substances are not acceptable for public areas or commercial use.
Installation of said trim is at user's risk!
2
B
4
8
7
C
3
5
3
5
1
6
7
4
1
4
1
8
Advertisement
