Breville the PopFan LFA100 Instruction Book page 3

• Do not let the USB cable hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• This fan is for household
use only. Do not use this fan
for anything other than its
intended use. Do not use in
moving vehicles or boats.
Do not use outdoors.
Misuse may cause injury.
• The fan is not intended for use
by persons (including children)
with reduced physical,
sensory or mental capabilities,
or lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• Always ensure the fan is
properly assembled before
use. Follow the instructions
provided in this book.
• This fan is intended for
household use only and not for
commercial or industrial use.
• Disconnect the USB cable
before assembling or before
cleaning and when the fan is
not in use.
LFA100_ANZ_IB_C20_FA.indd 3
• Avoid touching moving parts
of the fan. When adjusting
the movement of the front
grille, ensure the louvre knob
is the part being rotated.
Ensure to only rotate the
louvre knob for 0.5 to 1.5
turn in counterclockwise
direction as the front grille
may disassemble.
• Never insert fingers, pencils or
any other objects through the
guards whenever the power
plug is connected, in particular
while the fan is switched on.
• Do not operate in the presence
of explosives and/or flammable
fumes or liquids.
• Always turn the fan OFF when
the fan is not in use.
• Do not unplug the fan by
pulling on the USB cable.
• Never carry the fan by the
USB cable. Use the carry
strap provided.
• Never yank the USB connector
to disconnect the USB cable
from the USB port; instead,
grasp the USB connector and
pull to disconnect. Do not twist
or pull the USB cable around
sharp edges or corners.
• Please ensure the fan is in
collapsible format if hanging
on the wall. The fan will not be
balanced if hung on the wall in
3
5/6/20 1:24 pm