Mounting The Base Unit On A Wall - Sony SPP-ID300 Operating Instructions Manual

Mounting the base unit on a wall

1
Hang-up
tab
2
AC power
adaptor cord
3
Wall
bracket
Tip
To remove the wall bracket, press the lower tabs.
Telephone
line cord
4,5
1
Wall plate
2
AC outlet
1
Reverse the hang-up tab.
2
Plug the telephone line cord to
the LINE jack and the AC power
adaptor to the DC IN 9V jack.
Use the shorter cord for
mounting.
3
Attach the wall bracket to the
center of the base unit.
Align the ¢ marks of the wall
bracket with those of the base
unit.
4
Plug the telephone line cord to
the telephone outlet, and hook
the base unit to the wall plate.
5
Plug the AC power adaptor to
an AC outlet. Then fully extend
the antenna so that it points
towards the ceiling.
AC power adaptor
Telephone
line cord
Additional Information
31 EN