Dispensing Neutralising Agent Or Rinsing Agent; Neutralising Agent; Rinsing Agent - Miele PG 8504 Operating Instructions Manual

Adding and dispensing chemical agents
Neutralising agent Neutralising agent (pH setting: acidic) neutralises any residues of

Rinsing agent

48

Dispensing neutralising agent or rinsing agent

The container with the  symbol on the lid can be used to dispense
either neutralising agent or rinsing agent.
Neutralising agent is programmed at the factory.
To change the agent, e.g. from neutralising agent to rinsing agent,
the controls for the cleaning machine must be reprogrammed by
the Miele Customer Service Department.
alkaline cleaning agents on the surface of the load.
The neutralising agent is dispensed in the
stage, after the main wash (see programme charts). For this, the
container must be filled.
The dispensing of rinsing agent is deactivated ex-works.
Please contact Miele Service if you wish to activate it.
If rinsing agent has been activated, neutralising agent will not be
Interim rinse
dispensed in the
Rinsing agent is necessary to ensure water does not cling to and
leave marks on items, and to help items dry faster after they have
been washed.
 Residues of rinsing agent remain on the surface of items after
they have dried.
It is important to check the suitability of the rinsing agent being
used.
Rinsing agent is automatically dispensed in the
reservoir must be filled for this to occur.
Interim rinse
phase of the programme.
Final rinse
programme
phase. The