Panasonic AV-HS6000 Series Operation Manual page 109

[ME2]
4
Select an item in [Mode] in the [Play3] column.
f Select the playback mode.
[Last]
[Lead]
[Loop]
5
Select an item in [Reverse] in the [Play3] column.
f Select the playback direction.
[Off]
[On]
6
Select an item in [Variable] in the [Play3] column.
f Select the speed for variable speed playback. The available speeds are as follows.
[×1], [×2], [×4], [×8], [×1/2], [×1/4], [×1/8]
7
Select an item in [Freeze Mode] in the [Play3] column.
f Select the image for when playback is stopped.
[Frame]
[Field]
8
Select an item in [Play Enable] in the [Audio] column.
[On]
[Off]
NOTE
@
t Audio data is not played back in the following cases.
- When the playback of the moving image is stopped
- When [Fader] is selected in [Link Target] in the [Play2] column
- When [ON] is selected in [Reverse] in the [Play3] column
- When anything other than [×1] is selected in [Variable] in the [Play3] column
r Relationship between the amount of transition by the fader lever and Clip playback
f When [Fader] is selected in [Link Target], the following settings in the [Play1]/[Play2]/[Play3]/[Edit] column are disabled.
[Play], [Pause], [Stop], [Variable], [<Step], [>Step]
f When [Mode] in the [Play3] column is set to [Loop], the operation of [Lead] is performed.
Amount of transition
PGM-A
PST-B
Clip playback
[Mode]: [Lead]
[Reverse]: [Off]
Clip playback
[Mode]: [Last]
[Reverse]: [On]
Trimming moving images
Set the position where the playback of the moving images is to start (IN point) and the position when it is to end (OUT point). Moving images that have
been trimmed are played back from the IN point to the OUT point.
1
Select the <MEM> button → [CLIP] → [Play Clip1] to [Play Clip4] tabs.
2
Select an item in the [Play2]/[Edit] column.
f When [Pause] in the [Play1] column is selected after playback, moving images can be stopped at any frame.
[<Step]
Chapter 5 Basic Operations — Video memory
Links with ME2 transition operation.
Stops at the last frame after playback.
Returns to the first frame after playback.
Connects the last frame and the first frame to loop the playback.
Plays back moving images in the forward direction.
Plays back moving images in the reverse direction.
Stops at the frame image.
Stops at the field image.
Plays back the audio data recorded in the moving image memory.
Does not play back the audio data recorded in the moving image memory.
In point
Standby Playback
Lead
Standby Reverse
Last playback
Moves one frame back from the current frame.
Out point
Standby Playback
Lead
Standby Reverse
Last playback
– 109 –
Standby Playback Reverse
Lead playback
Standby Reverse Playback
Last playback