Warnings And Instructions - Philips EasySense SNS210 MC Design-In Manual

Warnings and instructions

4 Design-in Guide - EasySense SNS210 MC
• EasySense SNS210 MC must be used with Philips
Xitanium SR LED drivers.
• Do not apply mains power directly to the sensor.
• Do not cover the sensor during operation or mount the
sensor internal to the luminaire.
• External infrared light source in the space might have
influence on occupancy detection.
• Incorrect location of sensor (e.g., with setting up of
multiple SNS210 devices into a single network or a group
with addition of qualified wireless switches obstructions
in viewing angle) will result in incorrect functioning of
occupancy detection.
• Faulty settings of the sensor might result in undefined
startup.
• Make sure the sensor, especially the occupancy detection
lens, is protected from damage during shipment and
handling.
• The application area of EasySense SNS210 MC is
designed for a typical indoor environment (open/private
offices, conference rooms, classrooms, corridors, etc.) in
normally heated and ventilated areas. EasySense SNS210
MC has no protection against aggressive chemicals or
water.
• Make sure the the EasySense SNS210 MC Zigbee/
Bluetooth antenna is not covered by metal for proper RF
communication.
July 2020