Advertisement
ASSEMBLY
1) Connect Main Frame #1 & Short Frame
Crossbar #2. Insert the Large End Cap #13 for
Feet. Use Long Screw + Small Washer + Frame +
Small Washer + Lock Nut.
3) Place the Chair Frame inside the Main Frame.
5) Attach Long Frame Crossbar #5 using
Long Screw + Small Washer + Lock Nut.
MCDSG Double Seat Glider Chair Assembly Instructions
2) Connect Chair Frame Arm #7 and Chair Frame
Crossbar #4 by firmly pressing the kinked end into
the open end. Insert Small End Cap #H into Chair
Frame.
4) Locate the Swing Arm pieces. Connect Main
Frame #1 & Chair Frame Arm #7. Use Long Screw +
Small Washer + Frame + Small Washer + Lock Nut.
(NOTE) Make sure the Swing Arm is placed at
top on INSIDE. But on bottom it is on
OUTSIDE. Also, make sure the shape of the
Swing Arm is pointed toward the INSIDE, but
at bottom it is pointed toward the outside. Use
Long Screws. At top make sure a Plastic
Spacer is used between Main Frame and
Swing Arm. (Later, when assembly is
complete, an Acorn Nut #A will be added on
top of the Lock Nut.)
3
Advertisement
